Fixing your Lego R2-D2's angle for Star Wars 10225- Ultimate Collector's Series (UCS) model

Before I built L3-G0 I built the 10225 Lego UCS R2-D2 ("Ultimate Collector's Series", I guess they haven't thought of L3-G0, is he ultimater?")  Even before I joined the R2-D2 Builders Club, I realized that my new "ultimate" R2 didn't stand right in 3-legged mode.  It drove me nuts, so I fixed it.  Here's what I mean:

R2-D2 is supposed to have an angle between the legs and vertical of about 18 degrees for a total of 36 degrees.  However Lego's instructions for the UCS R2-D2 don't provide the right angle.  I didn't know the exact amount when I build the 10225 Lego kit, but I could tell that it looked wrong. He looks like he's about to fall on his face. 

I drew a red line sort of along the middle of the bad angle Lego kit and a green line in L3-G0's centerline.  As you can see they're pretty far off.  Notice that the back legs aren't too bad, it's just the angle of the body.

To fix it, all we have to do is make the middle leg a little longer.  To do that I moved the stop up one stud to the top of the leg support - and all of the teeth too.

Unfortunately, that means that it hits the stop plate in the center support.  That's the 4x4 plate with a 2x2 hole in the middle.  When it hits the plate, the foot won't retract all the way.

 

The fix is to remove the offending plate, which apparently isn't really needed, so you can use the cool hollow 4x4 plate somewhere else.  Here's a picture showing the removed plate circled and the stop in the space the plate had occupied.

Here's the result of our repaired droid.  A nicely inclined astromech at the same angle of the full size one.

Lego R2-D2's, both L3-G0 and the UCS 10225 Lego Kit

Anyway, I hope this post helps save the world from Lego R2-D2s that look like they're about to fall on their faces!

 

I'll leave you with an annotated copy of on of the R2-D2 Builders Club diagrams showing the correct dimensions of an Astromech Unit.  I've added the 36 & 18 degree angles in blue triangles.

Now I know I'm truly way too much of an R2 geek!

 

 



Building on Day 4 - Starting the Body!

The parts we needed for the body arrived!!!  We're still waiting on ~1500 of the original ordered parts (a little bit of rework has caused us to order a little more since then).  So there're still some gaps for parts.  Considering it's 15K+ parts, we've done great missing 10% of the bricks!

The body is 12 panels, and I started on six of the easiest.  Mostly because they're either identical pairs or mirrors.  So that's about half of the body!  (just the easy half).  3 of them are contiguous, the next two holes in this photo need an additional panel, and the last two go next to each other (despite the gap in the photo).  You can see the missing bricks :(

 



Three are next to each other, so we can see how they fit.  If you can get over the missing bricks, you can get an idea of the 3-D detail.  I'll probably take some close ups when we get the other bricks filled in.

And an idea of the scale, Lara posing with the partial body.

 

Time lapse video for day 4

(All 3 cats interrupted the video, they like playing with the loose bricks.  Additionally there's.... horses?)

L3-G0, the full size Lego R2-D2.

We've made a few Lego models, such as the Lego Disney Wonder cruise ship and a Lego Space Needle, and it's about time to do something new, but all of our ideas were pretty lame.  So in the back of our minds there was some thinking about "what could we build next?" 

Then we went to Emerald City Comicon and saw some of the wonderful Astromechs there.  Of course I wanted to build one, but quickly realized it'd be a ton of effort, cost a lot, and I wasn't terribly familiar with the materials.

It should've been obvious, but "gee, I wanna build a droid" sat in one part of my brain while "I wonder what I'll build next in Lego" sat in another part.  Eventually we came to the obvious conclusion:  "I'll build an L3-G0".  Don't know why it took so long.

Normally I grab a bunch of bricks and start building, then get more bricks, but for various reasons I started toying around with some of the sections in Lego Digital Designer to see if some of my ideas were practical.  Of course, once I started, I forgot to stop.

Now we have a 15,000 piece model pretty much figured out, and all we need are about 12K more bricks!  (Well, and some sort of frame, and some motors, and some electronics).  We're hoping that at least part of L3-G0 will be done for BrickCon in October.  Feel free to send us your spare bricks ;-)

There are some parts that will undoubtedly need changed from the LDD model, and he's going to need an internal frame of aluminum or wood or something, but it should be do-able.

A couple more screenshots of the drawing:

The model is based on plans from the R2-D2 Builder's Club (Astromech.net)  Of course brick isn't as finely detailed as manufactured parts, but he should be "pretty close" to spec.  He'll probably be about 100 pounds.  Eventually we'd like more functionality, but for a start we're looking at getting him to move and beep in time for Emerald City Comicon (ECCC) 2014.  We'd love to take him other places too, anyone know how to get him to Celebration in one piece?

We'll post more as the project goes.

Bricks acquired so far:  15900/16000.